Simrad FM90 Reference Manual Download

Page: 47 / 140

922-00027001/2.2

If you see an error in the

Output Messages

window, verify that the Sonar

Head has been discovered.

Click the

Sonar Setup

button.

This button is located on the top bar.

Observe that the

Sonar Setup

dialog box opens.

Click

Discover Sonar Heads

to search for the sonar on the network.

If the FM90 Sonar Head is found, select it, then click

Use Discovered Head

A discovered Sonar Head appears in the

Online Sonar Heads

list. If the Sonar

Head does not appear, the Ethernet connection between the Processor Unit and
Sonar Head has not been established.

Click

Close

Configuring your preferences

Use the time, temperature, and measurement units that are appropriate for your country.

Context

The

Preferences

dialog box is used to set up system preferences such as units of measure,

time format, etc. This dialog box also allows you to select the save location for screenshot
images and recorded sonar data files.

Procedure

Click the

Preferences

button.

This button is located on the top bar.

Observe that the

Preferences

dialog box opens.

Operational procedures

Summary of Contents for FM90













































































































































Search results

Summary of Contents for FM90

Reviews:

Related manuals for FM90

Brands by name

Popular brands

Simrad FM90, Reference Manual

Search results

Summary of Contents for FM90

Reviews:

Related manuals for FM90

Brands by name

Popular brands