Simrad EQ44, Manual Manual

Page: 65 / 102

EQ44/54 SETUP menu Chapter 10-15
Alphanumeric names:
First select the key with the desired letter, then you can either repeat
the keystrokes, which will toggle between e.g. A,B,C,1, or once you
have selected one letter you can go back and forth in the alphabet by
means of the +/- keys. Use the cursor key to go to next space or to go
back one space if you make a mistake.
Depending on the selected language, the 0 (zero) key will hold spe-
cial characters e.g. Æ Ø Å Ä Ö Ü Ñ, and the 9 (nine) key will hold:
(empty space) . -
Press the [CLR] key to delete everything from cursor position and to
the right of cursor in that row.
10.6 Factory settings
DELETE MEMORY:
It will be possible to erase all sounder set-
tings or SimNet/NMEA settings entered into the unit by the user,
and return to the default settings set up from the factory.
FACTORY PRESETS:
If the unit is still ‘alive’ but has ceased to
respond to normal operation, it could become necessary to return to
the factory presets - but first check ‘Troubleshooting’ in section 11.9.
MENU
Call up the menu bar, and...
7,5
activate the display for Factory settings
FACTORY PRESETS:
1
Return to SimNet/NMEA presets
2
Return to SOUNDER presets
CLR
Return to all factory presets
0
Show test display
MENU
Exit
To activate any of the functions, please follow the instructions in
the display. However, any attempt to make any type of change, will
first of all generate a WARNING display to inform you that you are
about to erase some or all data/settings.
ENT
If you are absolutely sure, press [ENT] to complete the job