CR44/54 Waypoint / route menu
Chapter 8-21
NMEA 1 connection
1
Transmit WPs
3
Transmit routes
7
Receive WPs and routes
MENU
Exit
Transmit WPs
1
Press
[1]
to start transmission of all waypoints stored in the CRXX
WP list to PC
When the transmission is completed you will receive a new info
window informing of how many waypoints were transferred.
MENU
Exit function and return to normal NMEA communication
Transmit routes
3
Press
[3]
to start transmission of all routes stored in the CRXX
Route list to PC
When the transmission is completed you will receive a new info
window informing of how many routes were transferred.
MENU
Exit function and return to normal NMEA communication
Receive WPs and routes
7
Press
[7]
to enable reception of waypoints and routes from the plan-
ning program
The transmission of waypoints and routes can now be activated from
the PC program.
The info window below will inform you of the progress of the recep-
tion of data by keeping an eye on the counter. When the counter
stops, means that all the data from the PC planner has been col-
lected. However, some PC programs may continue to transmit the
same data over and over again and will have to be stopped by press-
ing [ENT].
