Simpro Multi-Tip MT1200, User Manual

Page: 13 / 48

User Manual // Simpro Multi-Tip®
Original Instructions // English // v83.0 // October 2022 // Page
12
2.2.5 Type-A Cradle with base
2.2.5.1 Emplacing bins
Place the bin, drum, or container onto the cradle, positioned centrally
against the backplate. Once the bin is correctly emplaced, walk to
the control panel.
When moving heavy non-wheeled containers, it is
recommended to use a dolly, hand truck or forklift
attachment.
The catch arm(s) should be positioned to hold the top
edges of the bin, with a maximum free travel of 25mm (1
inch). The arm(s) can be unbolted and repositioned to
allow emptying bins of many different sizes.
2.2.5.2 Removing bins
Holding the upper lip of the bin, drum, or container, gently remove it from the cradle.
2.2.6 Type-D Cradle
2.2.6.1 Emplacing bins
Wheel the Eurobin into the cradle, positioned centrally, until it is
firmly against the buffers. Take care that both trunnions are
properly seated into the lifting arms; some Eurobins may need
to be tilted or lifted
s gh e s e e ‘c ch’. O ce
the Eurobin is correctly emplaced, walk to the control panel.
2.2.6.2 Removing bins
Using the grab-handle provided, gently remove the Eurobin
from the cradle
2.2.7 Type-X Cradle (custom)
2.2.7.1 Emplacing bins
Place the bin, drum, or container onto the cradle, positioned
centrally against the backplate. Once the bin is correctly
emplaced, walk to the control panel.
When moving heavy non-wheeled containers, it is
recommended to use a dolly, hand truck or forklift
attachment.
The catch arm(s) should be positioned to hold the top edges
of the bin, with a maximum free travel of 25mm (1 inch). The
arm(s) can be unbolted and repositioned to allow emptying
bins of many different sizes.
2.2.7.2 Removing bins
Holding the upper lip of the bin, drum, or container, gently remove it from the cradle.