Simpro Multi-Tip MT1200, User Manual

Page: 14 / 48

2.3 Operation of controls
The Multi-Tip controls are designed to allow safe, intuitive operation of the machine.
It is important to understand how to use the controls correctly. Improper operation may
result in a safety hazard, or damage to the machine.
1. Before operation, check that the machine is stable and safe to use as per §2.1 .
2. Place the full bin on the cradle, taking care that it is correctly positioned as per §2.2 .
3. Standing at the operator controls, visually confirm that no other person is within two
metres of the machine.
4. Simultaneously press and hold the SAFETY button under the left side of the shroud,
and the RAISE button under the right side. The cradle will start to lift.
5. When the cradle reaches the fully-raised position, the sound will change. Immediately
release the SAFETY and RAISE buttons, and wait for the bin to empty.
6. When emptying is complete, simultaneously press the SAFETY and LOWER buttons,
holding both down until the cradle rests back on the ground.
7. Remove the empty bin as per §2.2 .
8. Repeat from step 2. as required.
Release the SAFETY button to stop the cradle at any time.
Do not continue pressing the RAISE and SAFETY buttons after the cradle has reached the
fully-raised position. This will drain the battery, and can overheat the hydraulic fluid.