Simpro Multi-Tip MT1200, User Manual

Page: 8 / 48

1.5 Duty cycle
The duty cycle of the Multi-Tip depends on the installed powerpack, available power supply,
environmental factors, and the manner in which the machine is being used. The figures given
below are indicative only.
Power supply
Duty Cycle (tipping ~100kg bins at 1600mm)
Net throughput Number of bins Units
24V/20Ah GEL Battery* 5,000kg 50 bins Per charge
24V/20Ah GEL Battery on
continuous charge
2000kg 20 bins Per hour
24V/40Ah GEL Battery with
Solar Panel Kit**
2,000kg 20 bins Per day
Mains, 3-Phase ~415VAC 12,000kg 120 bins Per hour
Mains, 1-Phase ~230VAC 6,000kg 60 bins Per hour
12V/20Ah GEL Battery*** 2,500kg 25 bins Per charge
12V/55Ah GEL Battery*** 6,000kg 60 bins Per charge
*Two 12V/20Ah batteries in series (standard from 2022) **Subject to weather, latitude, and panel orientation (see §3.4.8 ) ***Discontinued 2022
Power supply s ec f c s c be f he ch e’s g e.
1.6 Service life
The nominal service life of the Multi-Tip is as follows.
Average Gross Bin Weight Nominal service life
< 50kg 100,000 cycles
50kg – 100kg 75,000 cycles
100kg – 150kg 50,000 cycles
> 150kg 10,000 cycles
1.7 Noise emissions
The noise emissions of the Multi-Tip do not typically excee ~ (A) he e ’s e .
Hearing protection is recommended if operating the machine for extended periods.
ISO standards for machinery safety specify that noise emissions are to be measured in A-
weighted decibels (dB(A)), a unit of volume which is adjusted to reflect the sensitivity of
human hearing. The measurements are taken at a point 1.6 metres above the ground at
he e ’ s working position.