10
www.simplicitymfg.com
Installation
BLOWER INSTALLATION
1. Install the blower (A) onto the mower deck (B).
Refer to Figure 12 for the position of the pins w/
lanyards (C) in relationship to the chute mount
bracket (D) on the mower deck. The pins w/
lanyards fit into the same holes that the chute
mount rod was installed.
2. Install the blower drive belt. Refer to Figure 13
for the proper belt routing. It may be required to
loosen the idler pulley mounting hardware to get
the belt past the belt keeps.
IMPORTANT NOTE: The gray area denotes the flat
side of the belt. V-side of belt must contact v-groove
pulleys, flat side of belt must contact flat pulleys.
Figure 12. Install Blower On Deck
A. Blower
B. Mower Deck
C. Pins w/ Lanyards
D. Chute Mount Bracket
New Style Mounts
Figure 13. Install Belt
C
C
B
A
D
Not
for
Reproduction