11
Installation
3" - 3-3/8"
(7,6 - 8,6 cm)
Figure 14. Check Belt Tension
A. V-Idler Pulley
B. Idler Pulley
B
A
A
B
C
C
Figure 15. Install Guards
A. Blower Belt Guard
B. Deck Guard Top
C. Knob
3. Check the belt tension by measuring the distance
from the center of the v-idler pulley (A, Figure 14)
mounting bolt and the blower housing. This should
measure between 3” - 3-3/8” (7,6 - 8,6 cm).
4. If measurement falls outside of this range, you
must move the idler pulley (B) either forward or
back to achieve the proper belt tension.
NOTE: If pulley position needs to be adjusted, make
sure that it is reinstalled in the same row of holes as
determined in the blower assembly (Step 9, Pg. 7).
5. Install the blower belt guard (A, Figure 15) and
secure with the flange head bolts previously
removed.
6. Install the deck guard top (B) and secure with the
supplied knobs (C).
Not
for
Reproduction