4
S4100-0035-6 4/2005
Transponder Type
Model
Description
Supv.
Alarm
4100-9600
Basic Transponder, includes bay equipment with power distribution interface, and 4100-0620
Basic Transponder Interface Module mounted in Block A
87 mA
87 mA
normal
87 mA
87 mA
4100-9601
Local Mode Transponder, includes bay equipment with power distribution
interface, and 4100-0625 Local Mode Transponder Interface Module mounted in
Block A
in local mode 112 mA 112 mA
Local Mode Controller Selection
(order as District P.O. from Space Age Electronics)
Model
Description
Supv.
Alarm
4601-9108 Flush
mount
4601-9109 Surface
mount
Red with white
lettering
normal
10 mA
10 mA
4601-9110 Flush
mount
4601-9111 Surface
mount
Beige with
black lettering
Local Mode Controller, 3-gang plate mounted;
flush mount requires a 1-1/2” (38 mm) deep
3-gang box; surface mount controllers include
a matching mounting box; refer to page 7 for
details
in local mode
20 mA
60 mA
Communication Modules
Model
Description
Size
Supv.
Alarm
4100-6031
City Circuit, with disconnect switches
20 mA
36 mA
4100-6032
City Circuit, without disconnect switches
For use with SPS
only, not RPS
20 mA
36 mA
4100-6033
Select one per SPS
Alarm Relay, 3 Form C relays, 2 A @ 32 VDC; for SPS or RPS
Mounts
on SPS
or RPS
15 mA
37 mA
4100-6038
Dual RS-232 Interface
1 Slot
132 mA
132 mA
4100-6045
Decoder Module
3 Slots
85 mA
163 mA
4100-6048
VESDA
®
Aspiration System Interface
1 Slot
132 mA
132 mA
4100-9816 Master Clock Interface Module with one standard RS-232 port (see S4100-0033)
1 Slot
132 mA
132 mA
Expansion, System, Remote, and TrueAlert Power Supplies and Accessories
Model
Voltage/Listing
Description
Size
Supv.
Alarm
4100-5101
120 VAC
UL
4100-5103
120 VAC, Canadian
ULC
4100-5102 220-240
VAC
UL
Expansion Power Supply (XPS);
9 A output, 3
built-in Class A/B NACs; Canadian models have low
battery cutout*
2 Blocks
50 mA
50 mA
4100-5115
NAC Expansion Module, 3 NACs, Class A/B,
mounts on XPS only
N.A.
25 mA
25 mA
4100-5111
120 VAC
UL
4100-5112
120 VAC, Canadian
ULC
4100-5113 220-240
VAC
UL
System Power Supply (SPS);
9 A power
supply/charger with 250 point IDNet channel, 3 Class
A/B NACs, and expansion slot for City Circuit or Alarm
Relay option; Canadian model has low battery cutout*
4 Blocks
175 mA
225 mA
4100-5125
120 VAC
UL
4100-5126
120 VAC, Canadian
ULC
4100-5127 220-240
VAC
UL
Remote Power Supply (RPS);
9 A power
supply/charger similar to SPS except no IDNet
channel or City Circuits, will accept one 4100-6033;
Canadian model has low battery cutout*
4 Blocks
150 mA
185 mA
4100-5120 120
VAC
UL
4100-5121 120 VAC, Canadian
ULC
4100-5122 220-240
VAC
UL
TrueAlert Power Supply (TPS);
3 built-in Class B
addressable Signaling Line Circuits (SLCs) rated 3 A
each, built-in battery charger, with 2 A auxiliary power
output tap; Canadian model has low battery cutout
4 Blocks
88 mA
100 mA
4100-5124 TrueAlert SLC Class A Adapter for all 3 SLCs,
mounts on TPS only
N.A.
7 mA
7 mA
4100-5152 12 VDC Power Option, 2 A maximum
1 Block
1.5 A maximum
4100-0636 Box Interconnection Harness Kit (non-audio);
order one for each close-nippled cabinet
Miscellaneous Options and Accessories
Model
Description
4100-1290
24 Point I/O Module for external connections, select each point as either a switch input (momentary or maintained) or
an output (for lamp/LED/relay); requires 1 Slot (refer to data sheet S4100-0032 for additional information)
4100-0632
Terminal Block Utility Module; provides 2, 16 position terminal blocks mounted on 4” x 5” single block size, capable of
up to 12 AWG wire (3.31 mm
2
)
4100-0633 Door Tamper Switch, connects into Transponder Interface Module, one per cabinet assembly if required
4100-0634 120
VAC
4100-0635 220/230/240
VAC
Power Distribution Module (PDM) select per system voltage;
one required per box
4100-9837
Green LED Power-on Indicator Kit,
required for
ULC listing of MINIPLEX transponder
Mounts using knockout provided in solid door
2081-9031
Series resistor for WSO, IDCs (N.O. water flow and tamper on same circuit, wires after water flow and before tamper)
470
, 1 W, encapsulated, two 18 AWG leads (0.82 mm
2
), 2-1/2” L x 1-3/8” W x 1” H (64 mm x 35 mm x 25 mm)
* Power supply NACs can provide synchronized strobe or SmartSync, two-wire operation.
Continued on next page
MINIPLEX Transponder Product Selection
