Fire Alarm Control Panel, BS-310/320
Operator Panel, BS-330
Protecting life, environment and property...
In the Event of a Fire Alarm
One or several fire detectors or manual call points
in one or several detection zones are signalling a
Fire Alarm
.
1 OFFICES
2 CANTEEN
3 WORKSHOP
FIRE ALARMS
19:23
Total: 3
(Display Picture - Example)
Actions to be taken - Operation Mode
1
Follow all precautions described in the
local fire instructions, step by step.
2
To silence the internal buzzer, press the
black Mute Panel button
3
Press
4
Observe the zone(s) in Alarm state on the
display
.
If you need to find out more detailed zonal / point
information before investigating the scene(s), follow the
General Procedure, Step 4,
a) to e) on the last page of
this folder,
How to View Detailed Information.
If
not
, go directly to step 5.
5
Investigate the scene(s) and carry out the
necessary actions.
6
To silence all alarms, press the red
Silence Alarms button
To
manually
resound the alarm zones, digit 1
(RESOUND) can be pressed.
When the fire is extinguished and all necessary repair
work is implemented (smoke is exhausted, new glass
replaced in the manual call-points, etc.), the system
should be returned to normal operating mode.
7
Press the green Reset button
If there are points still signalling an alarm after system
reset and no actions are taken, the points will
automatically be
reactivated
after a predefined timeout.
If you want to
disable the point(s
) before timeout - for
example, a manual call-point still signalling alarm -,
press
A point can also be reactivated (digit 3) at any time after
the disablement. To reset the system, repeat step 6 and
7.
Step
Interactive Fire Alarm System
Release 3
P-ASAFE-SH/LE, Rev. A, 010531
NOTE: To operate the panel, turn
the key to the left
(Access Level 2).
