Fire Alarm with Alarm Delay
A point is sending an alarm signal from a
Delayed Action detection zone (
alarm delay
is
active).
1*KITCHEN
FIRST DELAYED ACTION MSG 14:40
FIRE ALARMS
19:23
Total: 1
(Display Picture - Example)
Actions to be taken - Operation Mode
1
Follow all precautions described in the
local fire instructions, step by step.
2
To silence the internal buzzer, press the
black Mute Panel button
3
Press
4
Observe the zone(s) in Alarm state on the
display.
If you need to find out more detailed zonal / point
information before investigating the scene(s), follow the
General Procedure, Step 4,
a) to e) on the last page of
this folder,
How to View Detailed Information.
If
not
, go directly to step 5.
5
Investigate the scene(s) and carry out the
necessary actions.
6
To Prolong the delay period for the
selected zone, if necessary, press digit 4
(PROLONG DELAY) and investigate the
scene(s).
7
If there is
not
a fire, the procedure can be
ended by pressing the green Reset button
If there really is a fire
, press digit 2
(ACTIVATE) or activate the nearest manual
call-point to activate alarm, implement the
necessary measures, then go to step 8.
8
To silence all alarms, press the red
Silence Alarms button
When the fire is extinguished and all necessary repair
work is implemented (smoke is exhausted, new glass
replaced in the manual call-points, etc.), the system
should be returned to normal operation mode.
9
Press the green Reset button
If there are points still signalling an alarm, the points will
automatically be
reactivated
after a predefined timeout.
Before timeout, the points can be disabled (Enter). The
points can be reactivated at any time after the
disablement (digit 3).
In the Event of a Fire Warning
A fire detector in one of the detection zones has
entered the Fire Warning state (Prealarm or Early
Warning).
PREALARM
2 CANTEEN
FIRE WARNING
19:23
Total: 1
(Display Picture - Example)
Actions to be taken - Operation Mode
1
Follow all precautions described in the
local fire instructions, step by step.
2
To silence the internal buzzer, press the
black Mute Panel button
3
Press
4
Observe the zone(s) in Fire Warning state.
If you need to find out more detailed zonal / point
information before investigating the scene(s), follow the
General Procedure, Step 4,
a) to e) on the last page of
this folder,
How to View Detailed Information.
If
not
, go directly to step 5.
5
Investigate the scene(s) and carry out the
necessary actions.
After the scene(s) are investigated and the necessary
actions are taken, you can accept the Fire Warning(s).
6
To accept the selected Fire Warning,
press digit 4 (ACCEPT FIRE WARNING).
If there are several zones in Fire Warning state, each
one can be accepted in turn. Fire warnings that are
accepted, will no longer blink in the display. This allows
you to see on the screen whether a detection zone in
Fire Warning state is accepted or not.
When the situation is under control, the system should
be returned to normal operation mode.
7
Press the green Reset button
Step
Step
