EN
36
Secos - Simplex Energy Control System
13. FAQ
1. What is Secos?
Secos means Simplex Energy Control System and is a highly
innovative control system for surface temperature control.
2. How does Secos work?
Due to a constant volume flow and temperature measurement
in each heating circuit the hydraulic balancing values are
optimally and immediately adjusted.
3. How does the commissioning take place?
When the Secos energy-saving controller is connected for the
first time with the "Flamconnect" app, you will be prompted
to perform the commissioning.
You will be guided step by step through the required process.
4. Do you need to set more?
The hydraulic adjustment starts to work at the point of input
of the above-mentioned values. However, all settings can be
modified and additional functions specified later.
5. Can conventional room thermostats be used?
Secos is very flexible and can be used with all 230V room
thermostats which generate an analogue signal such as
a two-point or PWM signal.
6. Do the valves stick?
No, the ceramic disc valves are designed, and the material
selected, to ensure that the valves remain free, durable and
reliable. Additionally, any longer downtimes of individual
valves will be detected and the valves moved at periodic
intervals, to maintain freedom.
7. How sensitive are the Secos multisensors?
The Secos multisensors do not contain any moving parts.
They are therefore wear-free and function even with dirty water.
8. What happens in the event of a defect or fault?
In such an event, the Secos Energy Saving Controller will
register a warning signal. Then, the smartphone or tablet which
is connected via the Flamconnect app to the Secos energy
saving controller can be used to carry out a detailed analysis.
9. How does flushing take place?
There is an automatic flushing program, which can
conveniently be started after connection (e.g. using flushing
equipment) via the "Flamconnect" app. The automatic
flushing program flushes the heating circuits separately
and automatically until a reliable and constant volume flow
is detected by the Secos multisensors.
10. Can I also shut off heating circuits without a Secos actuator?
Yes, the Secos disc valves can be manually opened and closed
in the supply and return lines.
11. Is Secos compatible with other laying systems?
Secos is compatible with all commercially available underfloor
heating laying systems such as staple, nub plate, hook and
loop, drywall, support matting and renovation systems
12. Can all underfloor heating pipes be used?
All commercially available underfloor heating pipes can be
used. These are connected with the Secos system manifold
using Eurocone compression fittings.
Secos
- Simplex Energy Control System
Installation instructions
|
Operating instructions
