EN
Product range
3
The illustrations are symbolic and may deviate from the respective product.
Subject to technical modifications and errors.
1.
Product description
Secos is a highly innovative control system for surface temperature control where both volume flow and temperature are constantly
measured and optimally controlled. This ensures permanent hydraulic balancing at all times.
1
Secos system manifolds
• Supply and return manifolds made of stainless steel 1" female
thread.
• One filling / emptying / flushing / venting device per manifold.
• Pre-assembled snap-on board to accommodate the Secos
actuator.
• Secos multi-sensors mounted and wired at the factory.
• Delivered ready for installation on manifold bracket with sound
insulation.
• Outlets in ¾" Eurocone.
• Including Simplex filling and drainage plugs.
2
Secos energy saving controller
• Central core of the Secos Energy Control System.
• Evaluation of the system data and automatic control according
to requirements.
• To control the flow rate as well as the heat output in each circuit.
• Suitable for heating and cooling.
• Bus communication between energy-saving controller and
actuators.
• For up to 8 seperate room thermostats
• Assignment of the room thermostats to Secos actuators possible.
• With building management system connection (Modbus).
• Wireless connection via app Flamconnect.
• External condensation monitor can be connected.
• Valve and pump protection function.
• For all other features see "Functions & Features":
3
Secos actuator for ceramic valves
• Low power consumption - consumption only during movement.
• Continuous adjustment with precise position control.
• Prewired plug connection.
• Only 1 plug for all Secos actuators.
• Snap-on: Snap-on technology for mechanical and electrical
connection with just one click for error-free and time-saving
installation.
4
Secos mounting bracket
• Manifold bracket including sound insulation.
• Mounting in distribution cabinet or wall mounting.
• Sturdy version made of galvanized steel.
1
Product description
1
4
6
2
3
5
7
5
Secos multisensor
• For recording the volume flow and return temperature in each
heating circuit.
• No moving elements.
• Minimal pressure loss.
• Zero-flow detection.
• Prewired at the factory.
6
Secos supply line temperature sensor
• Recording of the supply line temperature in the system.
• Additional safety device for monitoring the maximum permissible
supply line temperature.
7
Secos disc valves
Unlike conventional standard systems with lift valves, Secos works
with ceramic disc valves which are actuated by a rotary movement.
The specially designed ceramic discs allow linear valve opening,
which ensures a uniform valve characteristic curve. In conjunction
with the Secos actuators and the infinitely variable valve positions,
this enables very precise control of the volume flows in all heating
circuits.
• Disc valve with trend-setting ceramic technology.
• For heating / cooling applications.
• Wear-resistant.
• Long service life.
• Stepless and precise supply line control in combination
with Secos actuators.
Secos
- Simplex Energy Control System
Installation instructions
|
Operating instructions
