5
The 4100-series IDNet card is designed to be mounted on the PDI in an FACP expansion cabinet.
The card can be mounted on any of the PDI connectors.
Use connector P2, labeled on the back side of the IDNet card, to connect to any of the eight PDI
connectors as shown in Figure 2, below.
Figure 2. Mounting onto the Power Distribution Interface
Step 1: Installing the IDNet Card into the PDI
Overview
IDNet CARD
STANDOFFS
#6 SCREWS
WASHERS
PDI CONNECTOR
(reverse side)
PDI
SCREW
RETAINERS
Summary of Contents for 4100-3101
Page 12: ...574 800 Rev D...