SimonsVoss WaveNet, Manual

Page: 184 / 210

6 Battery management
6.1 LockNodes
You can identify a communication problem (failed connection attempt) by
a red W in the LSM (see
Monitoring the devices in the network [
}
28] ). If the
communication problem persists even after repeated connection
attempts, this can have a number of causes:

Radio shadow through open door

Routing problem between CommNode server and RouterNode

Communication problem between CommNode server and RouterNode,
e.g. due to blocked port 2101

(Partial) network failure, e.g. due to defective switches

Temporarily suspended IP allocation, e.g. due to maintenance work in
the network

Low batteries
You can easily check the battery condition yourself.
Signalling
The signalling of the battery status depends on the LockNode used (see
Signalling the operating status [
}
192]
).
Warning monitor (LSM)
The LSM includes a warning monitor (| Reports |, entry Warning monitor .
You will see battery warnings for all locking devices used in the locking
system. To use this function effectively, you need a task that regularly tests
the battery status of your networked LockNodes.
WaveNet (Manual)
6. Battery management
184 / 210