Comparison voltages (RN and RN2)
>2.1 V
DC
HIGH (signal)
Output (LED)
Connect the LED to O2 or O3 to indicate the second or third output.
+3.3 V
O3
O2
LED
-
GND
+
Ω
X
1. Connect the cathode of the LED (-) via the series resistor X to O3 or O2.
2. Connect the anode (+) to the positive pole of the power connector next
to the IO connector.
The value of the resistor X depends on the LED used.
IMPORTANT
Current carrying capacity
The power connection next to the IO connector supplies between 3.0 V
DC
and 3.3 V
DC
and may be loaded with a maximum of 200 mA.
Do not use the connector to operate equipment that exceeds these
specifications.
Output (LED on relay)
Connect the LED to the relay to indicate the first output.
WaveNet
(Manual)
5. WaveNet Manager
90 / 210
