SimonsVoss WaveNet, Manual

Page: 51 / 210

Setting IP for DHCP operation (default)
If you use a DHCP server, the IP address is determined by a DHCP server.
ü
OAM tool available and unpacked.
ü RouterNode connected to the network.
1. Double-click on the executable file to start the OAM tool.
9
The OAM tool opens.
2. Click on the button Refresh .
9
IP address of the RouterNode updated.
3. Open the context menu by right-clicking on the entry of the IP address
of the RouterNode.
NOTE
Compare MAC
If you select the wrong RouterNode, you could assign the same IP address
multiple times.

Compare the MAC address of the entry with the label on your
RouterNode.
4. Click on the entry Set IP .
9
The window "Network configuration" opens.
5. Make sure that the checkbox Enable DHCP is activated.
6. If no address reservation on the DHCP server is provided for this Router-
Node, make a note of the host name (e.g. SV_32205C). You will need it
later during configuration in the WaveNet Manager (see
Add Router-
Node to WaveNet [
}
53]
).
7. Click on the OK button.
9 The window "Network configuration" closes.
9 RouterNode will restart.
8. Close the information window about the restart.
9. Close the OAM tool.
9 DHCP operation is set.
WaveNet (Manual)
5. WaveNet Manager
51 / 210