6. Click on the button ← Add all .
9
All locking devices are added.
7. Click on the OK button.
9
The "Administration" window closes.
8. Click on the OK button.
9
The "Warning attributes" window closes.
6.1.1 Battery change with integrated LockNodes
LockNodes that are integrated in the locking device (LockNode Inside) are
supplied with power by the locking device. When the locking device is
battery powered, the battery voltage decreases over time. As soon as the
battery voltage falls below a certain value, a battery warning is sent. If the
value drops further, the LockNode is deactivated to protect the remaining
capacity and the lock can no longer be addressed via WaveNet.
Replace the lock's batteries if there is a battery warning. For details, please
refer to the short instructions or the manual for the corresponding lock.
6.1.2 Battery change for external LockNodes
1. Remove external LockNodes from the mounting position (for example,
open the flush-mounted box).
2. Remove the rear inlay.
3. Remove the old batteries.
WaveNet
(Manual)
6. Battery management
190 / 210
