18
6. c
leaning
with
d
etergent
i
nStructionS
(cont.)
6.
2
Working with the Detergent Injection Tube
(cont.)
f
1. Insert the detergent injection tube into any pressure
washer detergent container of your choice. The pump
will draw the detergent and mix it with the water
automatically, being discharged through the detergent
nozzle at a low pressure.
2. Apply the detergent to a dry work surface from bottom
to top.
3. Allow detergent to remain on the surface for a short
time before rinsing. Do not allow detergent to dry on
the surface.
4. Rinse with clean water under high pressure.
5. When you are finish working with detergent, place the
siphon tube into a bottle with clean water and spray
water for one minute to rinse the detergent injection
tube and remove any soap residues that may clog it.
CAUTION
Damage may occur to painted surfaces if chemicals are
allowed to dry on them. Wash and rinse a small section
at a time.
6.
3
Working with the Foam Blaster
a
Engage the safety lock on the spray gun.
2
1
2
3
1. Rotate the foam blaster’s spray head from vertical
position to horizontal position.
2. Detach spray head by turning detergent bottle 1/4 turn
counter-clockwise.
3. Fill the bottle with the detergent.
4. Reattach the spray head on to the bottle by turning 1/4
turn clockwise.
Cleaning with Detergent Instructions
XG01_3200PSI_E.indd 18
2016-12-05 4:11 PM
