11
4. a
SSembly
i
nStructionS
(cont.)
4.3 Assembly Steps (cont.)
K
0
º
15
º
25
º
40
º
Detergent
Select the desired tip based on the following purposes:
•
0° (Red):
Thin and powerful stream of water
for difficult stains and debris
removal.
•
15° (Yellow):
Thin-angled spray for detailed
cleaning.
•
25° (Green):
Medium-angled spray for detailed
cleaning.
•
40° (White):
Large pattern for wider cleaning
applications.
•
Detergent (Black): This nozzle must be used when
applying detergents with the
on-board detergent injection
system. Applies detergents in low
pressure only.
To install tip, gently slide the collar back before inserting it,
then release the collar to lock the tip.
L
Adjust the pressure by turning the gun collar to the desired
setting for the following purposes:
DETERGENT
For applying detergent with the on-board
detergent injection system.
NOTE:
Machine performs siphon function
from the on-board detergent injection
system only if gun set to detergent setting
and using the detergent (black) tip.
(Follow the "Working with the Detergent
Injection Tube" instructions on page 17.)
HIGH (2000+ PSI)
For cleaning tough spots and grimes.
(e.g., stairs, concrete surface, driveway,
farm equipment or paint stripping)
MEDIUM
(1600+ PSI)
For general cleaning.
(e.g., fence, siding, deck and patio or lawn
equipment)
LOW (800
+
PSI)
For low pressure cleaning.
(e.g., vehicle, patio furniture or barbecue)
Assembly Instructions
XG01_3200PSI_E.indd 11
2016-12-05 4:11 PM
