background image

7

1. S

afety

  a

dvice

 

(cont.)

1.2 Safety Warnings (cont.)

  CAUTION — SERVICE

 

Before cleaning, repairing, inspecting, or adjusting, shut 
off the engine and make sure that all moving parts have 
stopped.

 

Have your product serviced by certified repair per-sonnel 
using only identical replacement parts. This ensures the 
safety of the product is maintained.

 

Ensure proper maintenance. Check for misalignment or 
binding of moving parts, breakage of parts and other 
condition that may affect the product’s operation. If 
damaged, have the product repaired before use. Many 
accidents are caused by poorly maintained equipment.

  IMPORTANT — COLD WEATHER START

Do not operate this pressure washer in temperatures below 
5˚C . Operating pressure washer below 5˚C may cause damage 
to the pump and other pressure washer parts.

  IMPORTANT — SAFETY FEATURES

Thermal Relief Valve: 

Protects the pump from overheating 

in case the nozzle gets clogged. This system should not be 
abused. Make sure the pump does not overheat.

Low-Oil Auto Shut-Off: 

Protects the engine and prevents 

operating without proper lubrication. If the engine oil level 
goes below the recommended level, the pressure washer 
shuts off automatically.

  CAUTION — PREVENT PUMP DAMAGE

 

Do not run the engine for more than 5 minutes without 
pressing the wand trigger or damage to the pump might 
occur. 

 

Never let the engine run unless the product is con-nected 
to a water supply. Ensure water is running through the 
pressure washer before attempting to start the engine. 

 

Never run caustic fluids or acid through this product.

  IMPORTANT — STORAGE

 

Store the product in a well-ventilated area, with an empty 
fuel tank. Fuel should never be stored or placed near the 
product.

 

When storing the product for winter, ensure that it is 
stored indoors (at room temperature), in a dry location 
away from any heat or ignition sources.

 

If the product is to be stored with fuel in the fuel tank, 
add a fuel stabilizer (38-0907-6) to keep the gas from 
breaking down.

 

To protect and extend the life of the product when storing 
it, use an antifreeze agent (039-8602) for the pump, 
which can be found at your local Canadian Tire store.

1.3 Intended Application

This product is designed for specific residential applications. Do 
not modify or use this product for any application other than 
the one it was designed for. This equipment was not designed 
for industrial use. Please refer to the icons below for suggested 
applications. For questions regarding other uses, please refer to 
our website at 

www.simoniz.ca

 or call us at 

1-866-4SIMONIZ 

(1-866-474-6664).

  IMPORTANT — APPLICATIONS

STAIRS

LAWN EQUIPMENT

VEHICLE

FENCING

DECK OR PATIO

GARAGE FLOOR

DRIVEWAY

SIDING

SECOND STORY

PAINT PREP

FARM EQUIPMENT

Safety Advice

XG01_3200PSI_E.indd   7

2016-12-05   4:11 PM

Summary of Contents for 039-8056-0





































Reviews: