13
5. e
ngine
o
peration
(
cont
.)
5.2 Adding Fuel
WARNING
•
Make sure there is enough fuel in the fuel tank before
operating the pressure washer.
•
Use only clean, fresh, unleaded fuel. Use a minimum of
87 octane/87 AKI (91 RON).
•
Do not use old gas, and do not mix oil with gasoline.
•
Fuel and its vapours are extremely flammable and
explosive. Fire or explosion can cause severe burns or
death.
IMPORTANT
•
Keep fuel away from sparks, open flames, pilot lights, heat,
and other ignition sources.
•
Check fuel hoses, tank, caps, and fittings fre-for cracks or
leaks. Replace if necessary.
•
If fuel spills, wait until it evaporates before starting engine.
•
Fill the fuel tank outdoors or in well-ventilated area.
S
Fuel Tank Capacity:
3
.2 L
1. Stop the engine (
g
Stopping Engine) and let it cool at
least 2 minutes before removing the fuel tank cap.
2. Clean the fuel cap area of dirt and debris. Remove the
fuel tank cap and make sure the fuel filter is in place.
3. Fill the fuel tank with fuel. Never overfill the fuel tank.
Fill tank to no more than 13 mm below the bottom of
the filler neck to provide space for expansion caused by
the engine heat. To allow for expansion of the fuel, do
not fill above the bottom of the fuel tank neck.
4. Reinstall the fuel tank cap.
Engine Operation
XG01_3200PSI_E.indd 13
2016-12-05 4:11 PM
