Simex SPI-N118, User Manual

Page: 45 / 48

User manual for - FLOW METER SPI-N118
Parameter Description Default value User's value
Desc.
page
t PrEc
Precision of thresholds and hysteresis displaying
(while relay is controlled due to total flow counter
value)
0 25
t unit
The unit of thresholds and hysteresis displaying
(while relay is controlled due to total flow counter
value)
lit. 26
modE Operation mode of relay „in” 26
t on Turn on delay of relay 0.0 (sec.) 27
t oFF Turn off delay of relay 0.0 (sec.) 27
unit
Unit of
“t on”
,
“toFF”
parameters of relay
„SEC” 27
ALArmS Reaction for critical situation of relay „oFF” 27
Configuration of measurement input (”inPUt” menu)
PULSEL Flow sensor factor (quantity of pulses per litre ) 1.00 27
FrEq Maximum input frequency 300 (Hz) 27
ZEro t Maximum time between two following pulses 1.0 (sec.) 28
mEAS t Width of measurement window 0.5 (sec.) 28
Configuration of current flow display (“FLouu” menu)
F PrEc
Decimal point position (precision of flow rate
displaying)
0.0 29
F unit
The unit of volume (Cubic measure) for flow rate
displaying
lit. 29
Ftunit The unit of time for flow rate displaying min 29
F or P Kind of value visible on the display „FLvAL” 29
Configuration of Batcher Counter reset and displaying mode (”bAtCH” menu)
b PrEc
Decimal point position ( precision of batcher
counter displaying)
0.0 29
b unit The unit of batcher counter displaying lit. 29
E Clr Active level/edge of batcher counter zeroing input oFF 30
m CLr Manual zeroing of total flow counter oFF 30
A rES Batcher autoreset function oFF 30
Atunit Time unit of autoreset delay SEC 30
A dLy Batcher autoreset delay 0 30
Configuration of Total Flow Counter reset and displaying mode (”totAL” menu)
t PrEc
Decimal point position ( precision of total flow
counter displaying)
0.000 30
t unit The unit of total flow counter displaying lit. 31
E Clr Active level/edge of total flow zeroing input oFF 31
45