Simex SPI-N118, User Manual

Page: 46 / 48

User manual for - FLOW METER SPI-N118
Parameter Description Default value User's value
Desc.
page
m CLr Manual zeroing of total flow counter oFF 31
Blockade input configuration
bL inP Active level/edge of blockade input oFF 31
Power on initialization configuration
Init d Kind of value displayed after device power on FLo 32
Configuration of data filtration (”FiLtEr” menu)
vALUE Filtering ratio 0 32
droP
Measured value change causing of temporal
filtering deactivation
20.0 (%) 32
Display parameters
briGHt Display brightness „bri 6
”
32
Configuration of peaks detection function (“HOLd” menu)
modE Kind of detected changes
„norm
”
32
PEA Minimum detected change 0.0 32
timE Maximum time of peak displaying
0.0 (sec.)
33
HdiS The type of displayed value „rEAL” 33
H r1 Source of relay R1, and LED R1 control „rEAL” 33
H r2 Source of relay R2, and LED R2 control „rEAL” 33
Settings of access to the configuration parameters (“SECU” menu)
Acc r1
Permission to changes of relay R1 threshold
without of the user password knowledge
on 33
Acc r2
Permission to changes of relay R2 threshold
without of the user password knowledge
on 33
RS 485 interface configuration (“rS-485” menu)
Addr Device address 0 33
bAud Baud rate
9600
(b./sec.)
33
mbAccE Permission to changes of configuration registers „on” 33
mbtimE Maximum delay between received messages 0 34
rESP Additional delay of answer transmission „Std” 34
Configuration of numerical parameters edition
Edit t Numerical parameters edit mode dig 34
46