User manual for - FLOW METER SPI-N118
•
If instantaneous flow (flow rate) is displayed (LED marked
“
Σ
”
is off) or batcher counter
value (
“
Σ
”
LED is pulsing), user can check main threshold values and
number of batches
counter
(which indicates how many times batcher was started). After pressing
[^]
or
[v]
buttons, name of the threshold (e.g.
”rELPr1”
) and its value or
”bAtCnt”
label and
number of batches counter
will be displayed on the display in alternating mode.
If
[^]
or
[v]
will be pressed in 5 sec again, the next threshold will be displayed, else the
device comes back to the measurement mode. If a
free access
is enabled (see description
of
”SECu” menu
), user can change the value of particular threshold pressing button
[ENTER]
(see:
PARAMETERS EDITION
). Using
button while
number of batches
counter
is displayed and confirm
„CLEAr?”
message by
[ENTER]
button causes zeroing
number of batches counter
.
•
If particular parameter has been changed and confirmed in quick view mode, its
new value is displayed in alternating mode with parameter name by few seconds.
Confirmed changes may be checked or user can switch viewed parameter
pressing
[^]
or
[v]
button.
•
Number of batches
counter is incremented after each start of batching process
(every first start after batcher counter zeroing).
•
If batcher counter value is displayed (
“
Σ
”
LED is pulsing) and counter value
exceeds 6 digits, then decimal point of the most left digit is pulsing. To view most
significant digits, it is required to decrease resolution or/and change unit to m
3
.
•
If total flow counter value is displayed ( LED marked
“
Σ
”
is on), and its length exceeds 6
digits, buttons
[^]
and
[v]
enable switching between more and less significant digits.
Positions of currently displayed digits are signalized by flashing decimal points (see
example below).
Example of switching between less and more significant digits of total flow result .
Figure 6.1. Switching between digits (screens) of total flow result.
Let, total counter result be equal 1236789876543.21:
–
while less significant 6 digits are displayed, flashing most left decimal point signalizes
that result is longer than 6 digits, to show more significant digits press
[^]
,
–
while medium digits are displayed both most left and most right decimal points are
flashing (Figure 6.1). Most right decimal point signalizes than result has less significant
digits – to see these digits press
[v]
button. Most left decimal point signalizes
additional more significant digits. Press
[^]
button to see these digits.
–
while most significant digits are displayed, most right decimal point is flashing, and
15
to instantaneous flow
display mode
to instantaneous flow
display mode
to instantaneous flow
display mode
i
