User manual - FLOW METER SPI-638
Parameter
Description
Default value
User's value
Desc.
page
t unit
The unit of “
OUt LO
” and “
OUt HI
” parameters
displaying, while active current output is controlled
due to total flow counter value.
unit
Lo r
Extension of the bottom of the nominal output range
5.0 (%)
Hi r
Extension of the top of the nominal output range
5.0 (%)
AL
Current output value on critical exception
22.1 (mA)
Active voltage output configuration (“OUtPUt” menu)
OUtmod
Active voltage output mode
„0-10” (V)
SourCE
Kind of value controlled active current output
FLo
OUt LO
Display value for 0 V, 1 V or 2 V voltage output
0.0
OUt HI
Display value for 5 V or 10 V voltage output
100.0
b PrEc
Precision of “
OUt LO
” and “
OUt HI
” parameters
displaying, while active current output is controlled
due to batcher counter value.
0
b unit
The unit of “
OUt LO
” and “
OUt HI
” parameters
displaying, while active current output is controlled
due to batcher counter value.
unit
t PrEc
Precision of “
OUt LO
” and “
OUt HI
” parameters
displaying, while active current output is controlled
due to total flow counter value.
0
t unit
The unit of “
OUt LO
” and “
OUt HI
” parameters
displaying, while active current output is controlled
due to total flow counter value.
unit
Lo r
Extension of the bottom of the nominal output range
5.0 (%)
Hi r
Extension of the top of the nominal output range
5.0 (%)
AL
Voltage output value on critical exception
11.0 (V)
Display parameters
briGHt
Display brightness
„bri 6
”
Configuration of peaks detection function (“HOLd” menu)
modE
Kind of detected changes
„norm
”
PEA
Minimum detected change
0.0
timE
Maximum time of peak displaying
0.0
(sec.)
HdiS
The type of displayed value
„rEAL”
H r1
Source of relay R1, and LED R1 control
„rEAL”
H r2
Source of relay R2, and LED R2 control
„rEAL”
H r3
Source of relay R3, and LED R3 control
„rEAL”
H r4
Source of relay R4, and LED R4 control
„rEAL”
66