Simex SPI-638, User Manual

Page: 64 / 68

User manual - FLOW METER SPI-638
Parameter Description Default value User's value
Desc.
page
r4 Activation of acoustic signal by relay R4 „oFF” 32
Configuration of measurement input (”inPUt” menu)
PULSEL Flow sensor factor (quantity of pulses per unit) 1.00 33
FrEq Maximum input frequency 300 (Hz) 33
ZEro t Maximum time between two following pulses 1.0 (sec.) 33
mEAS t Width of measurement window 0.5 (sec.) 33
Configuration of current flow display (“FLouu” menu)
F PrEc
Decimal point position (precision of flow rate
displaying)
0.0 34
F coEF Flow calculation coeffitient 1.000 34
F unit
The unit of volume (Cubic measure) for flow rate
displaying
unit 34
Ftunit The unit of time for flow rate displaying min 34
F or P Kind of value visible on the display „FLvAL” 35
Configuration of Batcher Counter reset and displaying mode (”bAtCH” menu)
b PrEc
Decimal point position ( precision of batcher
counter displaying)
0.0 35
b coEF Batch calculation coeffitient 1.000 35
b unit The unit of batcher counter displaying unit 36
E Clr Active level/edge of batcher counter zeroing input oFF 36
m CLr Manual zeroing of total flow counter oFF 36
A rES Batcher autoreset function oFF 36
Atunit Time unit of autoreset delay SEC 36
A dLy Batcher autoreset delay 0 36
Configuration of Total Flow Counter reset and displaying mode (”totAL” menu)
t PrEc
Decimal point position ( precision of total flow
counter displaying)
0.000 37
t coEF Total flow calculation coeffitient
1.000 37
t unit The unit of total flow counter displaying unit 37
E Clr Active level/edge of total flow zeroing input oFF 38
m CLr Manual zeroing of total flow counter oFF 38
Blockade input configuration
bL inP Active level/edge of blockade input oFF 38
Power on initialization configuration
Init d Kind of value displayed after device power on FLo 39
64