Sime MURELLE REVOLUTION 30, User, Installation And Servicing Instructions

Page: 56 / 100

56
6.3.3.4 INFORMATION menu
The INFORMATION menu is read-only and the data
cannot
be
modified.
From the “Main screen” :
Thu 18 Set 2014 Zone 10:30
Menu Mode
Off
Fig. 124
– press the
Menu
button to view the
“Menu”
selection
screen
– turn the encoder to select the menu “INFORMATION”
Esc Back
GENERAL SETTINGS [...]
INFORMATION [...]
TECHNICAL [...]
MENU
Fig. 125
– press the click encoder to confirm “INFORMATION” and ac-
cess the submenu
Esc Back
INFORMATION
‡
Alarms [...]
Esc Back
INFORMATION
Zone heating [...]
Boiler [...]
Heat pump [...]
Hot water [...]
Solar thermal [...]
ˆ
Fig. 126
– turn the encoder to select the required submenu
– press the click encoder to confirm the selected submenu
and access the relevant data display
Esc Back
INFORMATION
Room temperature 20.0°C
Heating set 80°C
Heating temp. 30°C
Fig. 127
– press the
Back
button to go back to the submenus
– turn the encoder to select another submenu
Esc Back
INFORMATION
Boiler [...]
Heat pump [...]
Hot water [...]
Solar thermal [...]
Firmware version 102
Fig. 128
– press the
click
encoder to confirm the selected submenu
and access the relevant data display
– continue in this way until all the necessary information has
been shown
– press the
Esc
button to go back to the
“main screen”
.
Thu 18 Set 2014 Zone 10:30
Menu Mode
Off
Fig. 129
6.3.3.5 TECHNICAL menu
It is recommended that the TECHNICAL Menu only be used by
professionally qualified technicians, since it is used to modify
system management data.
The submenu
“Boiler parameters”
requires the CODE (or pass-
word)
“1 2 3 4 5”
to be entered.
m
CAUTION
We recommend not changing the factory settings so
as not to alter optimal appliance operation. For any
specific support, please contact the Sime Ltd Techni-
cal Assistance Service.
From the
“Main screen”
:
Thu 18 Set 2014 Zone 10:30
Menu Mode
Off
Fig. 130