Sime MURELLE REVOLUTION 30, User, Installation And Servicing Instructions

Page: 11 / 100

11
BUTTON (A)
(used mainly by professionally qualified technicians and NOT
by the end user)
This allows technicians to view the
“menu”
select screen (e.g.
Menu
“GENERAL SETTINGS”
) and then to operate according to
what is written above the button on the display (e.g.
Esc
to exit and return to the main screen.
Esc Back
GENERAL SETTINGS [...]
INFORMATION [...]
TECHNICAL [...]
MENU
Fig. 3
MULTIFUNCTION ENCODER
If turned, allows the user to scroll through and select
the “Menu/rows” or the “Function mode” , or to change the val-
ues in the selected field.
In “Summer” mode, the DHW temperature can be adjusted.
In “Winter” mode, the DHW can be adjusted in relation to the
heating and the “Holiday function”.
Esc Back
GENERAL SETTINGS [...]
INFORMATION [...]
TECHNICAL [...]
MENU
Esc Back
GENERAL SETTINGS [...]
INFORMATION [...]
TECHNICAL [...]
MENU
Fig. 4
If pressed, click confirms the selection and takes the user to
the submenus (e.g. “LANGUAGE” or “Hot water” ) or confirms the
modified value or entry.
Esc Back
Winter
Hot water MAN 40°C
Heating MAN 20.0°C
Holiday function OFF
Esc Back
GENERAL SETTINGS [...]
INFORMATION [...]
TECHNICAL [...]
MENU GENERAL SETTINGS
Esc Back
Language ENG
Date and time [...]
Visualization [...]
Factory settings [...]
Fig. 5
BUTTON (B)
This allows users to view the
“Function mode”
screen (e.g. “Win-
ter”) and then to operate according to what is written above the
button on the display (e.g.
Esc
to exit and return to the
main screen).
Esc Back
Winter Off Summer
Hot water MAN 40°C
Heating MAN 20.0°C
Holiday function OFF
Fig. 6
1.2 Start-up
1.2.1 Preliminary checks
a
WARNING
– Should it be necessary to access the areas in the
bottom part of the appliance, make sure that the
system components and pipes are not hot (risk of
burning).
– Before replenishing the heating system, put on pro-
tective gloves.
Commissioning of the Murelle Revolution 30 boiler must be car-
ried out by professionally qualified personnel after which the
boiler can operate automatically. It may however be necessary
for the User to start the appliance autonomously without in-
volving a technician: for example, after a holiday.
In this case, certain checks and the following operations must
be carried out:
– check that the gas isolation and water system valves are
open.
1.2.2 Ignition
After having carried out the preliminary checks, proceed as fol-
lows:
– set the main system switch to "ON"
– after a few seconds, the
“Main screen”
is shown
Thu 18 Set 2014 Zone 10:30
Menu Mode
Off
ON
1.1 bar
Fig. 7
– Press the
Mode
button to view the “Function mode”
selection screen. Turn the encoder to select the pre-
ferred mode (e.g. “Winter”)
– press the
click
encoder to confirm “Winter”
– press the
Esc
button to go back to the
“main screen”
.
Check the “System pressure” by doing as follows:
– press the
Menu
button to view the
“Menu”
selection
screen
– turn the encoder to select the menu
“INFORMATION”
Esc Back
GENERAL SETTINGS [...]
INFORMATION [...]
TECHNICAL [...]
MENU
Esc Back
GENERAL SETTINGS [...]
INFORMATION [...]
TECHNICAL [...]
MENU
Fig. 8