Silverton 43SB, Owner'S Manual

Page: 21 / 207

GETTING FAMILIAR-1
The Shaft is connected to the engine
transmission with a coupling and extends
through the bottom of the hull. The
Pro-
peller is attached to the end of the shaft.
The shaft is supported forward of the
propeller by
Strut . The struts support and
stabilize the shafts.
The rotation of the Propellers propel the
yacht in the selected direction, controlled
from the Helm Station.
GETTING FAMILIAR with your 43 SPORT BRIDGE
This section of your Owner’s Manual will give you a virtual tour of your new 43SB .
The following areas will be described:
Hull, Deck, Interior, Bridge, and Engine Compartment.
HULL
The Rudders provide steering for the
yacht to port or starboard, depending on
the direction they are turned by the opera-
tor from the Helm Station steering wheel.
The Zinc Anodes are dealer installed on
the trim tabs, shafts, rudders, and transom
for the purpose of preventing electrolysis
and galvanic corrosion; which is discussed