Silverton 43SB, Owner'S Manual

Page: 138 / 207

CLEANING AND MAINTENANCE-4
Canvas Enclosure (Optional)
Cleaning / Maintenance
The canvas enclosure you purchased as an option
from your Silverton dealer consists of canvas fabric,
vinyl windows and zippers. An aluminum tubular
frame supports the enclosure and it is secured to the
bridge and deck with “snaps”. Each of these compo-
nents require a different cleaning and maintenance
procedure and they are as follows:
Canvas Fabric
The canvas should be cleaned on a regular basis
before dirt, salt, and other deposits accumulate and
become imbedded in the fabric. The canvas may be
cleaned, without removal from your yacht, while it is
in the normal upright position. Brush off any loose
dirt and then rinse with fresh water. Wash the fabric
with a mild soap and lukewarm (temperature less
than 100° F) water solution, rinse thoroughly with
fresh water and allow to air dry.
DO NOT use any cleaning agents containing de-
tergent, as they will remove the protective coat-
ing, resulting in stiffness and eventual cracking
of the fabric.
DO NOT dry the canvas fabric by any means other
than air-drying. Use of heated drying apparatus,
such as a hair dryer, will result in stiffness and
cracking of the material.
Vinyl Windows
The vinyl windows in your enclosure should be
cleaned on a frequent basis to extend their life and
maintain clarity. Rinse off any loose dirt with fresh
water and then wash with a mild soap and cool water
solution. After washing, rinse with fresh water and
dry with a soft cloth.
DO NOT use any abrasive cleaning agents or
brushes when cleaning your vinyl windows, as
they will scratch the material, resulting in poor
clarity.
DO NOT fold the vinyl windows after removing
them from the enclosure. Roll them prior to plac-
ing them in storage. Folding the vinyl windows
will cause creases and eventual cracking. If you
anticipate long-term storage, place a soft cloth
over the vinyl window and roll the window with
the cloth in place. The cloth barrier will prevent
the vinyl from sticking to itself, particularly dur-
ing warm weather.
Zippers
The various sections of your canvas enclosure are
secured together with zippers to permit easy removal
of any or all sections without the cumbersome weight
or size of the entire unit. The zippers are manufac-
tured of high impact plastic coated stainless steel
and have large teeth for smooth operation. They
should be washed while you are washing the canvas
and then periodically lubricated by rubbing a candle
on the zipper in the closed position and then open-
ing and closing several times to distribute the wax
lubricant.
Aluminum Tubular Frame
The upper portion of your canvas enclosure is sup-
ported by a tubular aluminum frame. The frame is
secured by stainless steel pins placed in brackets that
are permanently mounted on the
fi berglass surface
at various locations on the bridge and deck. The
aluminum frame is cleaned and maintained in the
same manner as the other aluminum components
on your yacht as previously described.