![background image](http://html1.mh-extra.com/html/silverline/pik-80-s/pik-80-s_manual_1273382012.webp)
GB
12
timer will be disconnected.
To deactivate the function it is sufficient to press the touch keys
or
(
12
/
11
), and the indicator will switch to respectively displaying the lower power
level
0
or the higher one
1
.
Power Management function (depending on model)
Some models are equipped with a power limiting function. This function allows
the total power generated by the hob to be set to different values selected by
the user. To do this, for the first minute after having connected the hob to the
power supply, it is possible to access the power limiting menu.
1
Press the “+” touch key for threeseconds. The letter PL will appear on the
clock
(
6
), if the model has a timer or on the hotplate indi-cators (if it is
not equipped with one).
2
Press the locking touch key (
8
). The different power values to which the
hob can be limited will appear and these can be changed using the “+” and
“-” touch keys.
3
Once the value has been selected, once again press the locking touch key
(
8
). The hob will be limited to the chosen power value.
If you want to change the value again, you must unplug the hob and plug it in
again after a few seconds. Thus you will again be able to enter the power limiting
menu.
Every time the power level of a hotpla-te is changed, the power limiter
will calculate the total power the hob is generating. If you have reached the
total power limit, the touch control will not allow you to increase the power
level of that hotplate. The hob will beep and the power indicator (
3
) will
blink at the level that cannot be exceeded. If you wish to exceed that value,
you must lower the power of the other hot-plates. Sometimes it will not
be enough to lower another by a single level as this depends on the power
of each hotplate and the level it is set at. It is possible that to raise the level
of a large hotplate that of several smaller ones must be turned down.
If you use the quick switch-on at maxi-mum power function and the said value
is above the value set by the limit, the hotplate will be set to the maximum
possible level. The hob will beep and the said power value will blink twice on the
indicator (
3
).
Safety switch off function
If due to an error one or several hea-ting zones do not switch off, the appliance
will be automatically discon-nected after a set amount of time (see table
1
).