GB
11
POWER BOOST FUNCTION DISCONNECTION
The Power boo st function can be disconnected by pressing touch key
(
11
)
to return to power level
9
. The function may also automatically be disconnected
if the temperature of the cooking area becomes too high.
Timer function
This function makes it easier to cook, as you do not need to be present throughout
the process: the timed hot plate(s) will switch off automatically after the set time
has lapsed. There is a separate timer for each hot plate, which allows all of the
hot plates to be timed simultaneously.
With these models you can use the clock as a timer for the hotplates for
times ranging from
1
to
99
minutes. All the cooking areas can be programmed
individually and in a simultaneous manner.
Timing one hotplate
1
The cooking zone to be timed must be selected. The related decimal point
must be lit up.
2
Select a power level for the hotplate from
1
to
9
using the touch keys
or
(
12
/
11
).
3
Press clock touch key (
6
). Timer indicator (
7
) will display
00
.
4
Immediately afterwards, enter a cooking time between
1
and
99
minutes, by
using the touch keys
or
(
12
/
11
). With the former the value will start
at
1
, whereas with the latter it will start at
60
. By pressing both at the same
time the value will be reset to
00
.
When the clock indicator (
7
) stops flashing, it will start to count down the time
automatically. The indicator (
3
) relating to the timed hotplate will alternately
display the selected power level and the symbol. When the clock reaches
01
,
it will switch from counting down minutes to seconds.
Once the selected cooking time has elapsed, the heating zone being timed
is turned off and the clock emits a series of beeps for several seconds. The timer
indicator will display a flashing
00
beside the indicator of the hotplate that has
been disconnected. If you wish to time another hotplate at the same time,
repeat steps
3
and
4
. If the heating zone turned off is hot, its indicator shows an
H or otherwise an
0
. To turn off the audible signal touch any sensor.
Changing the programmed time.
To change the programmed time, you must press the touch key of the timed
hotplate (
4
) to select it and then the clock (
6
). You may then read and change
the time.
DISCONNECTION OF THE TIMER
If you want to stop the timer before the programmed time is up.
1
First select the hotplate and then press clock touch key (
6
).
2
Use the touch key
(
11
) to reduce the time to
00
. The clock is cancelled.
For quick switch-off:
repeat step
1
as
above. Simultaneously pressing the
and
touch keys (
12
and
11
) the
