13
Cruise Monitor
When the Cruise Monitor is activated, the Display will switch automatically
to the Cruise Set Speed screen while you are setting your Cruise Control,
and them return to the screen visible before the switch.
Recent M.P.G.
Recent M.P.G. is calculated over roughly a ten minute time interval, the
Rolling M.P.G. extends that calculation out to roughly a twenty minute time
interval.
Trouble Monitor
When the Trouble Monitor is activated, an immediately switch of the Dis-
play to the Engine Diagnostics screen on the occurrence of an Engine Fault
code, or switch to the appropriate Scan Screen on these events; Engine
Coolant Temperature greater than 215ºF, Transmission Oil Temperature
greater than 240ºF, Battery Voltage less than 12.5 VDC.
Video Configuration screen
By pressing the B
RIGHT
and C
LEAR
simultaneously and holding them for
three seconds. The Video Configuration screen will appear. There are
several items on this screen, which you can scroll through using the Knob.
Enabled
This selection determines if the VMS will display the Video signal.
Orientation
This selection determines if the display is Normal or Rear. This pro-
vides a Mirror Image.
Brightness and Contrast
These selections allow values in the range of 0 to 255. 0 being the
Darkest or Lowest contrast, 255 being the Brightest or Highest contrast.
Saturation and Hue
These selections allows a value in the range of 0 to 255. Adjust to
taste.
Configuration
This selection is for future options, and will always be set at Stan-
dard.
Reset To Defaults
This selection resets the current video screen selected to the factory
defaults.
Go to Video 1,2,3, or 4
This selection switches between the Video Inputs.
