Quick Start Guide
To Operate The Keypad And Knob
Press the corresponding button for the function you
wish to perform. For screens with selectable options,
turn the knob to highlight the item you wish to change
and press the knob to select, turn the knob to change,
then press the knob again to confirm change.
To Start a Trip
Press
T
rip
. The Trip Screen will appear.
Pressing
T
rip
repeatedly with move the selection frame
from one section to another.
Press
C
lear
. The trip data should reset to zero. The
VMS will now automatically begin accumulating trip
information. The previous trip will be stored in History.
To Set Your Destination “Miles-To-Go”
Press
T
rip
. The Trip Screen should appear. Turn the
K
nob
. The Miles To Go
number near the bottom will adjust up or down accordingly. Press the
K
nob
to add 100 miles. Press
C
lear
to start over.
To Read Diagnostic Information
If the Check Engine indicator on the dash lights up, press
D
iag
. The Engine
Diagnostics Screen should appear, showing the cause of the problem.
Press
C
lear
to clear the top of the screen. If the problem is still occurring,
the code will quickly reappear. The dash will also show a log of past
diagnostic events on the bottom half of the screen.
To Set the Time
Press
p
rog
once Turn the knob to select the feature you wish to
change (in this case: Time). Press the knob to select. Turn the
K
nob
to
adjust the hours, and press the
K
nob
. Turn the
K
nob
to adjust the minutes,
and press the
K
nob
. Turn the
K
nob
to adjust the AM/PM indicator, and
press the
K
nob
. The clock is now set.
To Scan Multiple Gauges or Watch a Particular Gauge
Pressing
S
Can
will bring up the scan screen. This screen displays
several indicators including one that changes from gauge to gauge. At the
top of the screen there will be an arrow indicating that the gauges will cycle
one by one. Pressing
S
Can
again will stop it on the gauge being displayed
and instead of an arrow, a stop sign will appear indicating that the VMS is
currently stopped on that particular gauge. You can also simply turn the
knob to a specific gauge you would like to watch and it will automatically hold
on that gauge until
S
Can
is pressed again.
