9
Programming Screens
VMS Settings Screen
Press
p
rog
to activate the VMS Settings Screen. Here is where
a variety of parameters can be adjusted to match your coach configu-
ration and personal preferences.
Use the
K
nob
to adjust each item. Turn the knob to highlight the
parameter name, press the
K
nob
, and turn the
K
nob
again to adjust
the value. Press the
K
nob
again to return to the parameter name.
Clock and Alarm
Press the
K
nob
, then turn the
K
nob
to adjust the
hour. Press the
K
nob
, then turn it
to adjust the min-
ute. Then press it
and turn it to adjust
the AM/PM value.
Press the
K
nob
a fi-
nal time to return to
the “TIME” position.
Setting the
date follows exactly
the same process,
as does setting the
alarm clock. To
use the alarm clock
you must set the alarm time and also set the “ALARM SET” value to
“SET”.
The alarm clock will sound at the appropriate time, but obviously
the VMS must be on at that moment. If the VMS is turned off and
on again, the alarm clock will remember its status and will sound at its
appointed time. The alarm will sound until any key is pressed on the
VMS. After sounding, the Alarm Set value will return to OFF.
Daytime/Nighttime Palette
This allows you to select the Color Scheme for your Daytime and
Nighttime settings. The Daytime value indicates the Color Scheme
when the headlights are off. The Nighttime value indicates the Color
Scheme with the headlights on. By default the Nighttime is the same
as the Daytime value, thus the VMS can be set to different Color
Schemes when the headlights are turned on.
Daytime/Nighttime Brightness
This is the display luminance, on a scale from zero (0) to three
(3). If you drive with the light on during the day, you may want to
adjust the Low value higher. You may Cycle through all the Brightness
Modes by pressing the
b
righT
button. These two settings corollate to
the Palette settings.
