Silvercrest SOPE 650 A1, Operating Instructions Manual

Page: 37 / 144

■ 34
│
GB
│
IE SOPE 650 A1
Removing a blockage
Excessively moist, large or hard ingredients can block the screw press . If this
happens, the press screw stops automatically, the control lamp . flashes
alternately green/red.
Sometimes it is enough to stir the contents of funnel
carefully with a spoon or
similar. Then replace the lid and check whether the appliance is ready to
resume operation by pressing the button 3 . If this is not the case, proceed as
follows:
♦ Press and hold the button ! for at least 5 seconds to activate the reverse
function. The press screw runs in the reverse direction, the control lamp .
flashes green rapidly.
♦ Release the button ! to stop the reverse function. The control lamp .
lights up red again.
♦ Press the button
3
to start the appliance.
If the blockage persists:
♦ Remove the power plug from the socket.
♦ Tilt the appliance to remove any remaining ingredients from funnel and
pour them into a suitable container.
♦ Check the ingredients for foreign bodies and condition (see section
”The right ingredients” ).
♦ The appliance or the press screw may be 'stuck' due to excessively moist
ingredients. Clean the appliance as described in the section ”Cleaning” .
♦ Continue as described in the section ”Producing vegetable oil” .