Silvercrest SOPE 650 A1, Operating Instructions Manual

Page: 31 / 144

■ 28
│
GB
│
IE SOPE 650 A1
Preparations
Setting up the appliance
♦ Before using for the first time, clean all parts as described in the section
”Cleaning” .
♦ Place the appliance on a stable, level, dry surface near an easily-accessible
mains socket. If necessary, press the appliance down slightly to fix it to the
surface with the suction cups.
♦ Assemble the appliance as described in the section ”Assembling/dismantling
the appliance” . If necessary refer to the illustrations on the fold-out page as
well.
♦ Place the filter
-
on the oil container in such a way that the two latches
on the container lie in the recesses on the filter - .
♦ Place the pulp and oil containers under their respective outlets .
♦ Plug the mains cable
1
into the mains connection
0
in the motor unit
6
.
In order to prevent one of the safety appliances from being triggered, do not
connect the mains plug to the mains socket until the appliance has been filled
and the lid
on the funnel has been closed.
The appliance is now ready for use.
Assembling/dismantling the appliance
NOTE
► The appliance cannot be started if the lid and the funnel are not
correctly assembled and the press screw lock is not correctly closed.
Assembling the appliance
♦ Move the swivel arm to the highest position.
♦ Open the lock on the press screw by pushing it in the direction of
the symbol.
♦ Push the press screw as far as possible into the press screw housing
and insert both into the mounting in the motor unit 6 . The opening of the
press screw housing must face upwards.
Note that the press screw and housing can only be inserted into the
mounting if the press screw is correctly inserted into the housing . The
part with the sealing ring must be about 5 mm deep inside the housing ;
the screw connection at the lower end of the press screw protrudes
completely.