Silvercrest 106770, Operating Instructions Manual

Page: 23 / 145

19
SAR 28 A1
GB
IE
If there is no further input for 2 seconds, an automatic search for stations matching
the PTY entry starts. The search stops when the fi rst station is found. The selected
PTY entry blinks in the display
5
during the channel search.
Disabling / enabling the PTY function
♦ Press the MD/PTY 3 button to activate the PTY search.
The
PTY
symbol is shown on the display with the last PTY entry selected
(e.g.
POP M
).
Only stations with the PTY ID currently selected are included in the station search.
♦ Press the
MD/PTY
button again to disable the PTY search.
PTY
is no longer
shown on the display.
Station search by PTY ID
♦ If you do not input anything for 2 seconds whilst a PTY ID is being dis-
played, an automatic search for stations matching this PTY ID is started.
If no stations matching this PTY ID are found,
PTY NONE
is shown briefl y and the
search then ends at the station last set.
USB port
The device can process USB data carriers up to 16 GB.
Connecting data carriers
♦ Push the USB port protective cap to the right.
♦ Connect your USB device to the port.
♦ To protect against dirt, replace the protective cap on the USB port when no
USB device is connected.
Card reader
The device can process SD/MMC memory cards up to 2 GB, and SDHC
memory cards up to 32 GB.
Connecting data carriers
♦ Press the button to unlock the face plate and remove it from the
device (see also Section “Removing the face plate”).
♦ Push a memory card into the memory card slot with the lettering pointing
upwards until it engages.
IB_106770_SAR28A1_LB3.indb 19 14.11.14 14:31