Silvercrest 106770, Operating Instructions Manual

Page: 20 / 145

16
SAR 28 A1
GB
IE
SUBW - Subwoofer
You can connect an active external subwoofer to produce a more powerful bass
eff ect.
♦ Turn the multi-controller
17
to enable the bass eff ect (
SUBW ON
) or disable it
(
SUBW OFF
).
AVOL - Set the volume when radio is switched on
♦ Turn the multi-controller to set the volume level used when the radio is turned on.
STEREO / MONO - Set the audio output
♦ Turn the multi-controller to set the audio output in radio mode to stereo (
STE-
REO
) or mono (
MONO
). If you are receiving a stereo station, the stereo symbol
appears on the display.
LOUD - Enable / disable the loudness function
♦ Turn the multi-controller to increase base or treble levels (
LOUD ON
) or to
disable the function (
LOUD OFF
). When the loudness function is enabled,
LOUD is shown on the right of the display.
Dx / LOCAL - Set reception sensitivity
♦ Turn the multi-controller to align the reception sensitivity to national stations
(
DX
) or regional stations (
LOCAL
).
Please note that only stations with good reception quality will be played under
the
LOCAL
setting.
CT - Set the time
NOTE
► The device has an RDS-controlled clock. The clock sets itself automatically
when the RDS function is enabled and continues to run when the radio is
switched off . If you do not receive any RDS signal, you can set the time of
day manually.
♦ Turn the multi-controller to the right to set the minutes and to the left to set
the hours.
Adjust volume level for traffi c announcement transmission
HINWEIS
► If a radio station with traffi c announcements is being received, the volume
level for traffi c announcement transmission can be set by rotating the multi-
controller.
► The radio cannot be operated while you receive traffi c announcements
(display
TRAFFIC
). Only the „Volume“, „Mute“ and „Switch on/off “ func-
tions can be selected.
IB_106770_SAR28A1_LB3.indb 16 14.11.14 14:31