Silvercrest 106770, Operating Instructions Manual

Page: 21 / 145

17
SAR 28 A1
GB
IE
♦ Whilst you are receiving traffi c announcements (TA + TP appear at bottom
left of the display
5
), rotate the multi-controller
17
clockwise or anticlockwise.
TAVOL
appears on the display, together with the current volume level setting.
♦ Use the multi-controller to set the desired volume level. The setting is saved
automatically after approx. 5 seconds.
Radio functions
Select memory level
♦ Press the
BD/DISP 7
button to switch between station memory bands
(
FM1
,
FM2
,
FM3
).
Each station memory band covers the same frequency range (87.5 - 108 MHz)
and has 6 memory locations. The memory level is not displayed if the station
name is being displayed.
Automatic station search
♦ Keep the ▸▸I
4
or I◂◂
15
button pressed to start automatic station search.
The search stops when a station is found.
Manual station selection
♦ Press the ▸▸I or I◂◂ button briefly to change the frequency in
0.05 MHz (FM) increments until the required frequency is set.
Storing radio stations
♦ Keep one of the
1
to
6
buttons pressed for about 2 seconds to store the
station currently selected. The showing of numbers 1 to 6 on the display
indicates a successful store.
Selecting stations stored
♦ Use the
BD/DISP
button to select the memory level (
FM1
,
FM2
,
FM3
).
♦ Press one of the
1
to
6
buttons to select the station stored.
Automatic storing
♦ Keep the
A/PS 16
button pressed for 3 seconds. After the channel
search, the 6 saved stations are played successively for around 5 seconds,
and at the same time the memory slot number blinks. The search continues
automatically when weak stations are found.
IB_106770_SAR28A1_LB3.indb 17 14.11.14 14:31