Silvercrest 106770, Operating Instructions Manual

Page: 15 / 145

11
SAR 28 A1
GB
IE
♦ If required, connect the audio cinch cable of an external subwoofer to the
orange
SUBW 26
cinch socket on the device.
♦ Protect your device against theft with additional measures as required.
Attach the securing screw with the anchoring plate
32
and the securing
material to the engine fi rewall of the vehicle.
CAUTION
Possible damage to the cable!
► To avoid damage, observe the position of the cables when sliding the
device into the bay. There is a fi re hazard if cables are damaged!
♦ Carefully push the device into the installation bracket
30
until it locks into
place.
♦ After all the connections have been established, press the
RESET 22
button
for about 6 seconds with a ballpoint pen or other sharp object.
♦ Attach the face plate as described under “Installing the face plate”.
Removing the device
To remove the installed device, proceed as follows:
♦ Insert the right and left keys
31
into their respective slots on the sides of the
device. Ensure that the elevations on the spanners are facing outwards
(The tabs are now bent back).
♦ Pull the device out.
IB_106770_SAR28A1_LB3.indb 11 14.11.14 14:31