Fox-in-a-Box® Thermal Printer Installation Guide
Fox-in-a-Box
®
is the result of many years working with engineers across the globe enabling us to combine a printer
that offers the benefits of being easy to: set up, run, change labels, change ribbons and is a printer that has proved
to be very reliable and is suitably quiet enabling you to use it in normal office conditions.
Please follow the step by step guide to set up your DTP-1 printer.
Every printer has been thoroughly tested to run all the labels types before it leaves our factory.
At the back of this guide you will find the settings for the blue dials suggested for running each
label type.
Please note that it is important to set up your printer BEFORE connecting your printer to the PC.
Please remove all the tapes around the top and inside the printer.
Remember to switch on and connect your printer each time before you open the software.
If there are guidance systems included in the carton these can be found on the inside of the lid of
the printer.
Thank you for choosing Fox-in-a-Box
®
from Silver Fox
®
.
www.silverfox.co.uk
R4.0
Page 2 of 35
Copyright © 2015 Silver Fox Limited
