Fox-in-a-Box® Thermal Printer Installation Guide
Loading Label Rolls - Fox-Flo
®
Tie-on Labels
5.
Push down the front of the guidance system so that is securely held (you should hear a 'click').
Note
: If the guidance system is not seated correctly in the printer then this will cause printing problems.
6.
Make sure that the white line on the bottom sensor is aligned to the size of your labels.
Note
: For 15mm wide Fox-Flo
®
labels select 15mm. For 25mm wide labels select 25mm and for the LCLZ2 10mm
labels select 25mm.
7.
Correctly inserted, the Guidance System should look like the image below.
www.silverfox.co.uk
R4.0
Page 9 of 35
Copyright © 2015 Silver Fox Limited
