Fox-in-a-Box® Thermal Printer Installation Guide
Loading Label Rolls - Fox Tie-on Labels
8.
Manually feed the label roll through the printer.
9.
Align the moveable guide so that it rests
against the right hand side of the label roll.
10.
Close the head unit by pushing down the
head close knob until the head unit locks into
position (you will hear a "click").
11.
Ensure that the Horizontal and Vertical dials
have been set to the correct setting for the labels
- see Printer Settings for more details.
12.
Close the printer lid then press the FEED
button.
The printer will automatically align itself to the next
available label. Your labels are now ready for printing.
Note:
If the labels continue to feed without stopping
after pressing the FEED button or if the labels do not
print correctly then check that the upper and lower
sensors have been correctly aligned.
Please note:
The photographs used show the
full-width thermal ribbon-order code: TSR3/300/110.
The half-width ribbon, order code: TSR3/300/60 can
also be used with the Fox labels.
www.silverfox.co.uk
R4.0
Page 13 of 35
Copyright © 2015 Silver Fox Limited
