Fox-in-a-Box® Thermal Printer Installation Guide
Loading Label Rolls - Fox Tie-on Labels
1.
Open the printer lid and push the large blue
head-open lever to release the head unit.
2.
Slide the top sensor bar all the way over to the
right of the printer as far as it will go.
3.
Slide the bottom sensor to the middle position.
4.
Insert the guidance system as shown making sure that the recess on the guidance system slots into the bar on
the top sensor.
www.silverfox.co.uk
R4.0
Page 11 of 35
Copyright © 2015 Silver Fox Limited
