Fox-in-a-Box® Thermal Printer Installation Guide
Loading Label Rolls - Endurance
®
Valve Tags
5.
Lift up the top sensor bar. Feed through the
labels then close the top sensor bar.
6.
Close the head unit by pushing down the head
close knob until the head unit locks into position
(you will hear a "click").
7.
Ensure that the Horizontal and Vertical dials
have been set to the correct setting for the labels
- see Printer Settings for more details.
8.
Close the printer lid then press the FEED
button.
The printer will automatically align itself to the
next available label sheet. Your labels are now
ready for printing.
Note:
If the labels continue to feed without stop-
ping after pressing the FEED button or if the
labels do not print correctly then check that the
upper and lower sensors have been correctly
aligned.
Please note:
The photographs used show the
full-width thermal ribbon-order code:
TSR3/300/110. The half-width ribbon, order
code: TSR3/300/60 can also be used with the
Endurance
®
Valve Tags.
www.silverfox.co.uk
R4.0
Page 22 of 35
Copyright © 2015 Silver Fox Limited
