C P 2 1 3 0 - E K
22
Rev. 0.2
10.2. CP2400 AB LCD Header (J3)
This header can be used to connect the CP2130 to a CP2400 AB LCD expansion board.
10.3. SPI Monitor Header (J4)
The SPI monitor terminal block is included to easily interace with a SPI monitoring device with a common 10-pin
ribbon cable interface. See Table 1 for the SPI monitor pin definitions.
10.4. Mini-Universal Serial Bus (USB) Connector (J5)
A Mini-Universal Serial Bus (USB) connector (J5) is provided to facilitate connections to the USB interface on the
CP2130. See Table 2 for the USB pin definitions.
Table 1. SPI Monitor Pin Definitions
Pin #
Definition
1
No Connect
2
GND
3
No Connect
4
No Connect
5
MISO
6
No Connect
7
SCK
8
MOSI
9
SPI_MON_CS (See Section 10.17)
10
GND
Table 2. Mini-USB Connector Pin Definitions
Pin #
Definitions
1
VBUS
2
D-
3
D+
4
ID (No Connect)
5
GND (Ground)
