manualshive.com logo in svg

Silicon Graphics InfiniteStorage 4000 Series, Configuring And Maintaining

The Silicon Graphics InfiniteStorage 4000 Series is a high-performance data storage solution designed for seamless integration into any IT environment. Unlock the full potential of your system with its user-friendly interface and advanced features. Access the free user manual at manualshive.com to optimize your experience with this exceptional product.

Share
Download
background image

172

 

possible candidates consisting of different counts of SSD drives. You also have the 

option to enable SSD cache on all eligible volumes that are currently mapped to hosts. 

Lastly, after you create the SSD cache, you can enable or disable it on existing 

volumes or as part of a new volume creation.

SSD Cache Operations 

The following list includes common tasks that you can perform with the SSD cache 

feature.

Create

Performance Modeling

Locate

View Associated Physical Components

Add Drives (Capacity)

Remove Drives (Capacity)

Suspend

Resume

Delete

Enabling/Disabling SSD Cache

Change I/O Type

Rename

SSD Cache Restrictions

SSD cache is not supported on snapshots (legacy) volumes and snapshot images.

If you import or export base volumes that are SSD cache enabled or disabled, the 

cached data is not imported or exported.

The maximum usable SSD cache capacity on a storage array is dependent on the 

controller’s primary cache capacity. 

When you create an SSD cache, Data Assurance (DA) is automatically enabled if 

all the drives are DA-capable and the DA premium feature is enabled. DA cannot 

be disabled on the SSD cache, nor can you add non-DA capable drives to a 

DA-enabled SSD cache.

You cannot remove the last drive in an SSD cache without first deleting the SSD 

cache.

Only one SSD cache is supported per storage array.

Summary of Contents for InfiniteStorage 4000 Series





















































































































































































































































































Reviews:

No comments

Related manuals for InfiniteStorage 4000 Series

4IPNET WHG301 User Manual preview
WHG301
Brand: 4IPNET Pages: 97
Quick Eagle Networks 5842 Specification Sheet preview
5842
Brand: Quick Eagle Networks Pages: 4
NEC Express5800/R310e-E4 User Manual preview
Express5800/R310e-E4
Brand: NEC Pages: 86
ZyXEL Communications ZyXEL EES-1024AF User Manual preview
ZyXEL EES-1024AF
Brand: ZyXEL Communications Pages: 99
IBM e Server iSeries 825 Manual preview
e Server iSeries 825
Brand: IBM Pages: 52
Xantech XMUSICWP User Manual preview
XMUSICWP
Brand: Xantech Pages: 52
ZyXEL Communications ADSL/ADSL2/ADSL2+ Router 660R-6xC Series User Manual preview
ADSL/ADSL2/ADSL2+ Router 660R-6xC Series
Brand: ZyXEL Communications Pages: 282
IntesisBox IBOX-BAC Series Installation Sheet preview
IBOX-BAC Series
Brand: IntesisBox Pages: 2
Linksys WRT54GR - Wireless-G Broadband Router Quick Installation Manual preview
WRT54GR - Wireless-G Broadband Router
Brand: Linksys Pages: 81
Quantum STD2401LW Installation Instructions Manual preview
STD2401LW
Brand: Quantum Pages: 88
Eaton RS Enclosure Unpacking Manual preview
RS Enclosure
Brand: Eaton Pages: 2
Ozenda AR4505GW Instruction Manual preview
AR4505GW
Brand: Ozenda Pages: 116
LaCie STFS500400 User Manual preview
STFS500400
Brand: LaCie Pages: 26
Hama Paletto 00108043 Operating Instruction preview
Paletto 00108043
Brand: Hama Pages: 4
TRENDnet TEW-823DRU Quick Installation Manual preview
TEW-823DRU
Brand: TRENDnet Pages: 10
LaCie LITTLE DISK USB 2.0 User Manual preview
LITTLE DISK USB 2.0
Brand: LaCie Pages: 23
Ubiquiti EdgePoint EP-R8 Quick Start Manual preview
EdgePoint EP-R8
Brand: Ubiquiti Pages: 22
Air innovations SSC4500DX Operation And Maintenance Manual preview
SSC4500DX
Brand: Air innovations Pages: 30

Brands by name

Popular brands

Load more brands