manualshive.com logo in svg

Silicon Graphics InfiniteStorage 4000 Series, Configuring And Maintaining

The Silicon Graphics InfiniteStorage 4000 Series is a high-performance data storage solution designed for seamless integration into any IT environment. Unlock the full potential of your system with its user-friendly interface and advanced features. Access the free user manual at manualshive.com to optimize your experience with this exceptional product.

Share
Download
background image

90

Creating a Snapshot (Legacy) Volume 

create snapshotVolume baseVolume=”Mars_Spirit_4” 

repositoryRAIDLevel=5 repositoryDriveCount=5 

driveType=fibre 

userLabel=”Mars_Spirit_4_snap1” 

repositoryUserLabel=”Mars_Spirit_4_rep1” 

warningThresholdPercent=75 repositoryPercentOfBase=40 

repositoryFullPolicy=failSnapshot;

Snapshot (Legacy) 
Volume Names and 
Snapshot (Legacy) 
Repository Volume 
Names

The snapshot (legacy) volume names and the snapshot (legacy) repository volume 

names can be any combination of alphanumeric characters, hyphens, and underscores. 

The maximum length of the volume names is 30 characters. You must enclose the 

volume name in double quotation marks. The character string cannot contain a new 

line. Make sure that you use unique names; if you do not use unique names, the 

controller firmware returns an error.
One technique for naming the snapshot (legacy) volume and the snapshot (legacy) 

repository volume is to add a hyphenated suffix to the original base volume name. 

The suffix distinguishes between the snapshot (legacy) volume and the snapshot 

(legacy) repository volume. For example, if you have a base volume with a name of 

Engineering Data, the snapshot (legacy) volume can have a name of Engineering 

Data-S1, and the snapshot (legacy) repository volume can have a name of 

Engineering Data-R1.
If you do not choose a unique name for either the snapshot (legacy) volume or the 

snapshot (legacy) repository volume, the controllers create a default name by using 

the base volume name. These examples are snapshot (legacy) volume names that the 

controllers might create:

If the base volume name is aaa and does not have a snapshot (legacy) volume, the 

default snapshot (legacy) volume name is aaa1.

If the base volume already has 

n

-1 number of snapshot (legacy) volumes, the 

default name is aaa-

n

.

If the base volume name is aaa and does not have a snapshot (legacy) repository 

volume, the default snapshot (legacy) repository volume name is aaa-R1.

If the base volume already has 

n

-1 number of snapshot (legacy) repository 

volumes, the default name is aaa-R

n

.

In the examples from the previous section, the user-defined snapshot (legacy) volume 

name was Mars_Spirit_4_snap1, and the user-defined snapshot (legacy) repository 

volume name was Mars_Spirit_4_rep1. The default name that was provided by the 

controller for the snapshot (legacy) volume was Mars_Spirit_4-1. The default name 

that was provided by the controller for the snapshot (legacy) repository volume was 

Mars_Spirit_4-R1.

Summary of Contents for InfiniteStorage 4000 Series





















































































































































































































































































Reviews:

No comments

Related manuals for InfiniteStorage 4000 Series

IBM 8275-416 Quick Reference Card preview
8275-416
Brand: IBM Pages: 8
SanDisk Mobile Ultra Memory Stick Micro User Manual preview
Mobile Ultra Memory Stick Micro
Brand: SanDisk Pages: 1
Patton electronics SMARTNODE 4552 Getting Started Manual preview
SMARTNODE 4552
Brand: Patton electronics Pages: 65
Intenso 2,5" EXTERNAL HARD DRIVE KIT User Manual preview
2,5" EXTERNAL HARD DRIVE KIT
Brand: Intenso Pages: 94
US Robotics USR8700 Quick Installation Manual preview
USR8700
Brand: US Robotics Pages: 36
Planet ADSL 2/2+ VPN Firewall Router ADE-4300A/B User Manual preview
ADSL 2/2+ VPN Firewall Router ADE-4300A/B
Brand: Planet Pages: 132
NetComm 3G25W-R Manual preview
3G25W-R
Brand: NetComm Pages: 69
Quantum ValueLoader LTO-1 User Manual preview
ValueLoader LTO-1
Brand: Quantum Pages: 76
Billion BiPAC 7301VGP User Manual preview
BiPAC 7301VGP
Brand: Billion Pages: 120
ADIC FCR 200 Operator'S Manual preview
FCR 200
Brand: ADIC Pages: 140
H3C MSR 930 Installation, Quick Start preview
MSR 930
Brand: H3C Pages: 4
Acrosser Technology ANR-C62-N1 Series Manual preview
ANR-C62-N1 Series
Brand: Acrosser Technology Pages: 57
3Com NETBuilder SI Using Manual preview
NETBuilder SI
Brand: 3Com Pages: 212
Transcend TS128MJF2A User Manual preview
TS128MJF2A
Brand: Transcend Pages: 25
IBM System Storage TS3500 Introduction And Planning Manual preview
System Storage TS3500
Brand: IBM Pages: 290
Quantum RDX 8000 Quick Start Manual preview
RDX 8000
Brand: Quantum Pages: 45
Supermicro SUPERSERVER 1028UX-CR-LL1 User Manual preview
SUPERSERVER 1028UX-CR-LL1
Brand: Supermicro Pages: 128
Kimball Footprint Radius Profile Undersurface Storage Assembly Instructions Manual preview
Footprint Radius Profile Undersurface Storage
Brand: Kimball Pages: 6

Brands by name

Popular brands

Load more brands